- 您现在的位置：买卖IC网 > Sheet目录1168 > 71M6533-DB (Maxim Integrated Products)BOARD DEMO 71M6533
71M6533- DB Demo Board User’s Manual
Commands controlling the Auto-Calibration Function:
CL
AUTO-CALIBRATION
CONTROL
Comment
Description:
Usage:
Allows the user to initiate auto-calibration and to store calibration values.
CL [option]
Command
combinations:
Example:
CLB
CLS
CLC
CLR
CLD
CLB
Begin auto-calibration. Prior to auto-calibration, the calibration
coefficients are automatically restored from flash memory.
Save calibration coefficients to EEPROM starting at address
0x0004
Use machine-readable calibration protocol
Restore calibration coefficients from EEPROM
Restore coefficients from flash memory
Starts auto-calibration and saves data automatically.
Before starting the auto-calibration process, target values for voltage, duration and current must be entered in
MPU RAM (see section 1.9.5) and the target voltage and current must be applied constantly during calibration.
Calibration factors can be saved to EEPROM using the CLS command.
Commands controlling the Pulse Counter Function
CP
PULSE-COUNT CONTROL
Comment
Description:
Usage:
Allows the user to control the pulse count functions.
CP [option]
Command
combinations:
Example:
CPA
CPC
CPDn
CPD60
Start pulse counting for time period defined with the CPD
command. Pulse counts will display with commands M15.2,
M16.2
Clear the absolute pulse count displays (shown with
commands M15.1, M16.1)
Set time window for pulse counters to n seconds, n is inter-
preted as a decimal number.
Set time window to 60 seconds.
Pulse counts accumulated over a time window defined by the CPD command will be displayed by M14 after the
defined time has expired.
M14 will display the absolute pulse count for the W and VAR outputs. These displays are reset to zero with the
CPC command (or the XRAM write )1=2).
Commands for Identification and Information:
I
INFORMATION MESSAGES
Comment
Description:
Allows user to read information messages.
Usage:
I
Displays complete version information
The I command is mainly used to identify the revisions of Demo Code and the contained CE code.
Page: 17 of 75
`
REV 3
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
71M6534H-DB
BOARD DEMO 71M6534H
71M6541F-DB
DEMO BOARD 71M6541F
71M6543F-DB-CT
DEMO BOARD 71M6543F-DB-CT
72-CNV-5
CONVERTER RS-232 TO RS-422 5V
72346-001
72346-1-SCA-II REC
72347-001LF
CONN RECEPT SCA2 20POS VERT PCB
72436-001LF
80POS EXT HT. REC SCA-2
72442-201LF
CONN RECEPT SCA2 80POS VERT PCB
相关代理商/技术参数
71M6533G
制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Exceeds IEC 62053/ANSI C12.20 Standards
71M6533G-IGTR/F
功能描述:计量片上系统 - SoC AC Power Monitoring SoC-Programd RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6533H
制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Energy Meter IC
71M6533H-IEL
制造商:Maxim Integrated Products 功能描述:Metering Systems on a Chip - SoC Precision Energy Meter IC
71M6533H-IEL/F
制造商:Maxim Integrated Products 功能描述:Metering Systems on a Chip - SoC Precision Energy Meter IC
71M6533H-IELR
制造商:Maxim Integrated Products 功能描述:Metering Systems on a Chip - SoC Precision Energy Meter IC
71M6533H-IELR/F
制造商:Maxim Integrated Products 功能描述:Metering Systems on a Chip - SoC Precision Energy Meter IC
71M6533H-IGT/F
功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel